3 host table, 1 add or edit a managing host ip – CANOGA PERKINS 9145ELB NID Software Version 4.01 User Manual

Page 29

Advertising
background image

System Configuration

9145ELB NID Software User’s Manual

IP/SNMP Agent Configuration

19

3.1.3 Host Table

On the IP/SNMP Agent Configuration screen (Figure 3-4), type 3 and press Enter. The Host
Access Table screen (Figure 3-7) opens.

Use this screen to configure the 9145ELB to send and receive SNMP, FTP, and Telnet traffic to
the Managing Host IP address, and access from specific Telnet clients when Telnet security is
enabled. Use the Host Access Table to configure access by each host including access type and
privileges (SNMP, FTP, Telnet).

Traps can be generated from the 9145ELB to a CanogaView host to initiate discovery or to
synchronize the NID to CanogaView. Send Discovery Trap and Send Synchronization Trap have
been added to the Host Table UI screen. When invoked from the screen, a trap is sent and
logged to all the entries in the trap table, regardless of the master trap setting. When
CanogaView receives a Discovery trap it adds the unit to the database if it does not already know
the unit. When CanogaView receives a Synchronization trap, it adds the unit to the database if it
does not already know the unit, then synchronizes the unit. If it already knows the unit, it
synchronizes the unit.

Figure 3-7 Host Access Table screen

3.1.3.1 Add or Edit a Managing Host IP

To add a Managing Host IP, from the Host Access Table screen, type A and press Enter. To
delete a Managing Host IP, type D and press Enter.

To edit an existing Managing Host IP select Edit (E). The Edit Host Access screen (Figure 3-8)
opens.

1. Type the Managing Host IP address to add to the Host Access list and press Enter.

2. Type the IP Mask Size (default value 32) and press Enter. To have an entire subnet

access the 9145ELB, enter the mask size for the subnet.


Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
--------------------------------HOST ACCESS TABLE------------------------------
Managing Host Telnet FTP SNMP SNMP V1/V2c Rd V1/V2c Wr V1/V2c
IP/Mask Bits Access Access Access Protocol Community Community Access

172.016.000.000/16 All All Write V1/V2c/V3 public private Superv

Select [(A)dd, (D)elete, (E)dit, (M)ore]:
[(T) Send Discovery Request Trap, (S)end Synchronization Request Trap]

------------------------------------Messages-----------------------------------

Advertising