CANOGA PERKINS 9145ELB NID Software Version 4.01 - Manual (Page 59)

Diagnostics 9145ELB NID Software User’s Manual
Latency/Jitter Test
49
Local PBit Rcvd The priority as it was received at the end of the Round Trip.
Far End DSCP Sent This is the configured DSCP.
Far End DSCP Rcvd The DSCP that was received at the destination 9145ELB.
Local DSCP Sent The configured DSCP value is put back into the packet at the far end for the
return trip.
Local DSCP Rcvd This is the DSCP that was received at the end of the Round Trip.
Figure 4-4 Latency/Jitter Test screen
Type the number of the function you wish to change, and press Enter. Once the settings have
been entered, type 13 and press Enter to begin or end testing. Press Esc to return to the
Diagnostics menu. Configuration items are as follows:
1. To IP Address The remote NID's Test IP Address or the IP Address of the network
element to be tested IP Address.
2. From IP Address The IP address that the 9145ELB will use in the IP Source Address
field of the test packets. Press the Space bar to scroll through Auto Selection,
Management IP, Test IP, and Aux IP.
The Auto Selection setting will start first with the Test IP. If the To IP Address is in the Test
Network Subnet, the Test IP will be used in the packet. If the Test IP is not available or the
To IP Address is not in the Test Network Subnet, the Aux IP is checked. If the Aux IP is
not available or the To IP Address is not the Aux Network Subnet, the Manager IP is
Canoga Perkins Corp. Ethernet 1G/10G Network Interface Device 29-AUG-2011
9145ELB-971-4-0 V04.01 10:55:13
--------------------------------LATENCY/JITTER TEST----------------------------
Test IP Addr 10.10.12.1
Test VLAN IDs C/T/S 0 /0 /0 Round Trip Packets 0
Test Duration 00:00 Dropped Packets 0
Minimum Latency (ms) 0.000000 Minimum Jitter (ms) 0.000000
Average Latency (ms) 0.000000 Average Jitter (ms) 0.000000
Maximum Latency (ms) 0.000000 Maximum Jitter (ms) 0.000000
Far PBit Sent 0/Local Rcvd ? Local PBit Sent ?/Far Rcvd ?
Far DSCP Sent 0/Local Rcvd ? Local DSCP Sent ?/Far Rcvd ?
1) To IP Addr 10.10.12.1 5) Packet Timeout sec (1-10) 3
2) From IP Addr Aux IP 10.0.13.122 6) Packet Priority (0-7) 0
3) Test VLANs C/T/S 0 / 0 / 0 7) Packet DSCP Code (0-63) 0
4) Test Packets Per Sec 1 8) Packet DF Bit Clear
9) Test Duration min:sec (0=forever) 0
10) Min Test Payload Size (40 - 9950) 40
11) Max Test Payload Size (40 - 9950) 40
12) Start/Stop Test
Select [1-12]:
------------------------------------Messages-----------------------------------