Canon C70 - Manual (Page 135)

Chapter 5 Paper Handling 5-21
P
aper Handling
Printing on High Resolution Paper HR-101
To load High Resolution Paper HR-101 in the MultiPASS C70, follow the
same procedure as for loading paper in the multi-purpose tray
(
1 p. 2-40). However, before printing, be sure to raise the paper output
guides, as described below.
After using a package of High Resolution Paper, be sure to perform the
cleaning operation described on the following page, Using the Cleaning
Sheet.
Using the Paper Output Guides
When printing on Canon High Resolution Paper HR-101 or Canon
Banner Paper, you should use the guides on the MultiPASS C70’s paper
output tray to help support the printed sheet as it exits the unit. This
will keep the sheet from sagging and pulling through the unit as it exits,
which can lead to poor print quality.
1. Raise both paper output guides to a vertical position.
❏ You can hold the document tray up for easy access to the paper
output guides.
n
Always raise both paper output guides.