Canon C70 - Manual (Page 221)

Chapter 8 Receiving Faxes 8-11
Receiving F
a
x
e
s
What Happens When Fax/Tel Mode is Selected
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when FAX/TEL AUTO SW is selected. See the
following page for details on changing the settings:
n
You can also set these options from the MultiPASS Desktop Manager.
(
1 MultiPASS Suite Software User’s Guide)
Telephone Fax Fax
Sending document
manually
Sending document
automatically
The MultiPASS C70 answers without ringing.*
The MultiPASS C70 listens for the fax tone.
(For 8 sec.)
The fax tone
is detected.
The fax tone is not detected.
The document is
received automatically.
The MultiPASS C70 starts ringing.
Pick up the
handset to talk.
If you don’t pick up the handset
(within 22 sec.).
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT .
DISCONNECT
RECEIVE
(Factory default setting)
(The fax tone is
detected and the
MultiPASS C70
switches to receive
mode.)
The MultiPASS C70
disconnects the call.
Not all fax machines are capable of sending a fax
tone. For those cases if you set the
DEFAULT
ACTION to RECEIVE , the MultiPASS C70
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 55 seconds.
F/T RING TIME
(Factory default
setting = 22 sec.)
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
* Australia only: After answering, the MultiPASS C70 plays “You are
connected. Please hold.”