Canon C70 - Manual (Page 276)

12-2 Maintenance Chapter 12
MultiPASS C70 Guidelines
Follow these guidelines to avoid damage to your MultiPASS C70 and
harm to you or others:
❏ Place the MultiPASS C70 on a stable surface. Do not use an angled
stand. Avoid setting the unit in direct sunlight.
❏ Do not install the MultiPASS C70 near devices that contain magnets
or generate magnetic fields, such as speakers.
❏ Do not subject the MultiPASS C70 to strong physical shock or
vibration.
❏ Make sure the area where you use the unit is free from dust.
❏ Keep the MultiPASS C70 clean. Dust accumulation can prevent the
unit from operating properly.
❏ To ensure proper electrical contact, make sure the unit is firmly
plugged in.
❏ Never pull on the cord to unplug the MultiPASS C70. Pull on the
plug itself.
❏ Do not overload the electrical outlet where the MultiPASS C70 is
plugged in.
❏ For your safety, unplug the MultiPASS C70 during electrical storms.
❏ To avoid damage to the unit from overheating, do not block the
exhaust vent. Install the unit approximately 10 cm away from walls
and other equipment.