Canon C70 - Manual (Page 41)

Chapter 2 Setting Up Your MultiPASS C70 2-3
Setting Up
Y
our
MultiP
ASS C70
Choosing a Location for Your MultiPASS C70
Before unpacking your MultiPASS C70, follow these guidelines to
choose the best location for it:
c
Please review the information provided in Important Safety Instructions
(
2 p. 1-18), to make sure you are installing your MultiPASS C70 for safe
use.
❏ Put the MultiPASS C70 in a cool, dry, clean, well ventilated place:
• Make sure the area is free from dust.
• Make sure the location is not affected by extreme temperature
changes, and always stays between 10° and 32.5°C.
• Make sure the area’s relative humidity is always between 20%
and 85%.
❏ Keep the MultiPASS C70 away from direct sunlight. If you have to
place the unit near a window, install heavy curtains or blinds to
protect the unit from sunlight.
❏ If possible, put the MultiPASS C70 near an existing telephone outlet,
to avoid the expense of installing a new one.
❏ Place the unit near a standard 200–240 V AC power outlet.
❏ Place the MultiPASS C70 near the PC you will be connecting it to.
Make sure you can reach it easily, as you will be using it as a fax
machine, copier, telephone, printer, and scanner.
❏ Do not use or store the unit outdoors.
❏ To avoid damage to the unit from overheating, do not block the
exhaust vent. Install the unit approximately 10 cm away from walls
or other equipment.
❏ Do not plug the MultiPASS C70 into the same circuit as an appliance
such as an air conditioner, electric typewriter, television, or copier.
Such devices generate electrical noise that can interfere with your
MultiPASS C70’s ability to send and receive faxes.
❏ Set the MultiPASS C70 on a flat, stable, vibration-free surface that is
strong enough to support its weight (approx. 5.4 kg).
❏ Do not install the MultiPASS C70 near devices that contain magnets
or generate magnetic fields, such as speakers.