Network fax/tel switching (new zealand only) – Canon C70 User Manual
Page 232
8-22
Receiving Faxes
Chapter 8
Network FAX/TEL Switching (New Zealand Only)
In New Zealand, Telecom N.Z. offers the FaxAbility capability. This
service allows you to assign two numbers to your line: one for fax and
one for telephone. When the fax number is called, the network sends a
specific ring tone which your unit recognises and automatically handles
as a fax call. If the telephone number is called, a different ring tone is
sent out from the network so that the call is handled as a voice call. This
means that there is no switching delay at the caller’s end.
n
You can also set the MultiPASS C70 for network FAX/TEL switching
from the MultiPASS Desktop Manager. (
1 MultiPASS Suite Software
User’s Guide)
Setting the MultiPASS C70 for Network Switch
Follow the procedure below to set the receive mode to
NET SWITCH
.
1. Press
Function
.
2. Press
Data Registration
.
3. Press
Set
.
4. Use
d or u to select
RX SETTINGS
.
RX SETTINGS
02
08
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function