Canon C70 - Manual (Page 89)

Chapter 3 Registering Information in the MultiPASS C70 3-7
Registering Inf
ormation
in the MultiP
ASS C70
10. When you have finished changing settings, press Stop to return to
standby mode.
Ex:
Returning to a Previous Level
To return to a previous level so you can continue browsing, press Data
Registration . Each time you press Data Registration , you will return to
the previous level until the unit is back in standby mode.
Returning Directly to Standby Mode
If at any stage you wish to return directly to standby mode, press Stop .
n
❏ If you do not press a button for 60 seconds, the unit will
automatically return to standby mode.
❏ The settings in the menus described in this section can also be
adjusted from the MultiPASS Desktop Manager. ( 1 MultiPASS Suite
Software User’s Guide)
❏ Settings changed from the MultiPASS Desktop Manager will override
any settings made from the operation panel.
❏ Settings changed using the operation panel will not be displayed in
the MultiPASS Desktop Manager.
15:00 FaxOnly
Stop