Receiving faxes automatically: fax only mode, Setting fax only mode – Canon C70 User Manual
Page 215
Chapter 8
Receiving Faxes
8-5
Receiving F
a
x
e
s
Receiving Faxes Automatically: FAX ONLY MODE
When the MultiPASS C70 is set up for a dedicated line, set
FAX ONLY
MODE
to automatically receive documents whenever a call comes over
the fax line.
Setting FAX ONLY MODE
Your MultiPASS C70 is factory-set to
FAX ONLY MODE
. If you have not
changed the receive mode to
Fax/Tel Mode
or
NET SWITCH
, simply
follow this procedure:
1. Press
Receive Mode
to select
FAX ONLY MODE
.
❏ After a few seconds, the LCD display changes to the following
display:
Ex:
If you have previously set
FAX/TEL AUTO SW
or
NET SWITCH
in the
RX MODE
setting of the
RX SETTINGS
menu, you will have to change
the mode back to
FAX ONLY MODE
. Follow this procedure:
1. Press
Function
.
2. Press
Data Registration
.
3. Press
Set
.
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function
15:00
FaxOnly
FAX ONLY MODE
Receive Mode