Canon C70 - Manual (Page 306)

12-32 Maintenance Chapter 12
Transporting the MultiPASS C70
Whenever you plan to transport the MultiPASS C70, you need to
prepare it so it will not be damaged during the move.
1. DO NOT remove the BJ cartridge from the unit.
2. Make sure the cartridge holder is in its home position on the right
side of the unit.
❏ If it is not in its home position, press the C button (inside the
unit).
3. With the cartridge holder on the right side of the unit, tape the BJ
cartridge and cartridge holder to the side of the unit.
4. Disconnect the power cord.
5. Disconnect the handset or telephone. Disconnect the extension
phone, answering machine, or modem (if using them). Then
disconnect the telephone line and the parallel cable to the PC.
6. Remove the document tray. Then, remove the extension from the
document tray. ( 1 p. 2-13)
7. Remove the document support. ( 1 p. 2-12)
8. Remove the handset, handset cradle, and cradle support from the
MultiPASS C70. ( 1 Appendix B, Handset)
9. Replace all tapes and shipping materials you removed when you
first unpacked the MultiPASS C70. ( 1 p. 2-9)
10. Pack the MultiPASS C70 and all its components into its original
shipping carton. Use the illustration on page 2-6 for reference.