Canon C70 - Manual (Page 51)

Chapter 2 Setting Up Your MultiPASS C70 2-13
Setting Up
Y
our
MultiP
ASS C70
Attaching the Extension and Document Tray
The document tray and extension catch documents as they come out of
the MultiPASS C70 after being scanned.
Attach the extension to the document tray, and then the document tray
to the unit as explained below.
n
Be sure to attach the extension to the document tray before attaching the
document tray to the unit.
1. Hold the extension so that it curves outwards and slide it into the
rails on the back of the document tray. Then slide the inner section
of the extension into the inner rails on the document tray.
2. Slide in the extension until it stops.
EXTENSION
DOCUMENT
TRAY