Canon C70 - Manual (Page 321)

Chapter 13 Troubleshooting 13-13
Tr
oub
leshooting
INSTALL BC21e/20
(Ctd.)
LINE IN USE
LOAD PAPER
MEMORY FULL
MEMORY USED nn%
—
—
#037
—
You tried to print a
received black & white
fax, print a report, or
print a black & white
document in memory
with the optional
BC-22e Photo BJ
cartridge installed.
The unit is set for
Fax/Tel Mode and you
are receiving a
telephone call.
The multi-purpose tray
is empty.
The unit’s memory is full
because it has received
too many documents, or
a very long or detailed
document.
Memory is full because
you tried to send too
many pages at once, or
a very long or detailed
document.
Shows the percentage
of memory currently in
use.
Remove the optional
BC-22e Photo BJ
cartridge and install
the BX-20 Black or
BC-21e Colour BJ
cartridge. (
1 p. 12-19)
Answer the call.
Load paper in the
multi-purpose tray
(
1 p. 2-40). Make
sure the stack does
not exceed the paper
limit mark (
P). Then
press the Resume
button.
Print out any
documents that are
stored in memory
(
1 p. 7-29). Then start
the operation again.
Divide the document
and send each part
separately. To free the
unit’s memory, print
or delete any faxes in
memory you no
longer need.
(
1 pp. 7-29, 7-33)
If you need more
space, wait for the
unit to send any faxes.
Also, print or delete
any faxes in memory
you no longer need.
(
1 pp. 7-29, 7-33)
Message Error Code Cause Action