Canon C70 - Manual (Page 181)

Chapter 7 Sending Faxes 7-5
Sending F
a
x
e
s
(8 pels/mm
×
7.7 lines/mm)
Suitable for documents that contain photographs. With
this setting, areas of the document that contain photos are
automatically scanned with 64 levels of grey, rather than
just two (black & white). This gives a much better
reproduction of photos, though the transmission time is
longer.
❏ After about 10 seconds, the LCD display returns to standby
mode.
For colour sending, set the resolution as follows:
1. Press Color/B&W to turn on the light above this button.
2. Press Resolution .
❏ The current colour resolution setting is displayed.
Ex:
3. Press Resolution to select the colour resolution setting you want.
❏ You can select from the following:
Provides standard colour resolution.
Provides a higher quality colour resolution.
❏ After about 10 seconds, the LCD display returns to standby
mode.
n
You can change the resolution setting while the document is being
scanned for sending. However, please note that your new setting will
only be effective from the next page scanned.
FAX FINE
FAX STANDARD
Resolution
FAX STANDARD
Resolution
Color / B&W
FAX PHOTO