Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 10)

10
Static and Kinematic Surveys-2.0.0en Using the TR500 terminal
Menus, continued Entering information
A typical example can be found in
the main Survey panel:
Two inputs have to be made here, the
Point Id and the Antenna Height. Use
the cursor down / up keys to move to
the desired input field. In the current
example the Point Id can be entered.
Use the alphanumeric keys on the
terminal to enter the information.
Use the CE key to correct any typing
error.
Use the ENTER key to conclude the
input.
A shortcut is to press the numbers
which are associated with each
choice directly. For instance if you
press "6" you will get straight into
"Configure"
6
7
8
9