Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 33)

33
Static and Kinematic Surveys-2.0.0en Changing the system configuration
6
7
8
9
13
23
29
33
Creating new configuration sets
Creating new configuration sets
Highlight the configuration set which
you want to copy to a new one. The
parameters of this set will be copied
across to the new one you will create
by pressing F2 NEW.
The following display appears:
Type in a new name. Input of a
description and a creator's name is
optional. Finish this step by pressing
F1 CONT.
If you press ESC instead, then you
return to the previous screen without
having created a new configuration
set.
A new configuration set under the
name "Test_PP" has been created.
The parameters are equivalent to the
one of "PP_STAT".
Now we are ready to edit the
parameters of this new configuration
set. Just press F3 EDIT to get into a
sequence of several screens which
contain all relevant configuration
parameters.
In case the factory default
configuration sets do not fully meet
your requirements you can easily
create new ones by carrying out the
following procedure:
Select "6 Configure" from the Main
menu. The main menu is the first one
to appear after power on. In case
only menu items 1 to 3 are visible
press F3 SHOW first.
The following display appears: