Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 28)

28
Static and Kinematic Surveys-2.0.0en Exploring the sensor status during operation
6
7
8
9
3
3
Suggested exercise: Get familiar with system status
• Start up a sensor and begin a
Survey.
• Start measuring a point (by
pressing F1 OCUPY in the main
Survey panel)
• Explore various status screens:
- Satellite Status
- Skyplot
- Watch the Stop & Go indicator
- Check battery level
- Current (navigated) position
• Finish the site occupation (by
pressing STOP and STORE after
entering a Point Id and an Antenna
Height).