Leica Geosystems GPS System 500 - Getting Started with Static and Kinematic Surveys - Manual (Page 29)

29
Static and Kinematic Surveys-2.0.0en Changing the system configuration
6
7
8
9
13
23
29
33
Changing the system configuration
parameters
It is again very easy to navigate
further and get access to individual
parameters: Either by pressing
numbers (e.g. 2 for Operation) or by
using the cursor down / up keys and
to highlight the line of interest and
then pressing F1 CONT.
A detailed description of all con-
figuration parameters can be found in
the Technical Reference Manual.
This guideline will focus on those
which are of importance to Static and
Rapid-Static measurements only.
In the five following subchapters we
describe 5 different configuration
examples which are of relevance for
static and kinematic surveys.
The user has direct access to all
configuration parameters via the
CONFIG key.
Almost all currently used
configuration parameters can be
altered any time. Access to these
parameters is via the CONFIG
button. Upon pressing it, the following
menu appears: