Panasonic NV-RX1-2-5 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Durée de charge et durée maximale de prise

de vues continue en mode de prise de vues

manuel

No. de

référence du
bloc-batterie

Durée de

charge

Durée maximale de

prise de vues continue

NV-
RX1EG

NV-
RX2EG

NV-
RX5EG

Fourni

60 mn

50 mn

50 mn

40 mn

VW-VBS10E

65 mn

55 mn

55 mn

45 mn

VW-VBS20E

130 mn

110 inn 110 inn 90 mn

VW-VBH10E

80 mn

65 mn

65 mn

55 mn

VW-VBH20E

160 mn

130 mn 130 mn 110 mn

(Les durées indiquées dans le tableau ci-dessus sont
approximatives.)

Remarques:

•Selon l’état du bloc-batterie, le temps nécessaire pour la

recharge peut être plus long que le temps indiqué

ci-dessus.

• L'utilisation du zoom et des autres fonctions augmente la

consommation de courant, et donc le temps de prise de
vues réel par bloc-batterie peut être de 30% à 50%
inférieur au temps continu maximal de prise de vues
indiqué dans la liste ci-dessus.

• Lorsqu’on met le caméscope en circuit après avoir fixé le

bloc-batterie, le témoin de charge restante indique
initialement l’état de charge maximal du bloc-batterie, et

ce quel que soit l’état de charge actuel de la batterie.
Après 1 minute environ, le témoin change et indique la
charge restante actuelle approximative.

Comment charger un bloc-batterie lorsque sa durée

de fonctionnement est devenue trop courte pour un

usage pratique, ou lorsqu’il est resté rangé pendant

longtemps:

Continuer à le charger pendant 24 heures, même après
que le témoin de charge du bloc d’alimentation/charge se
soit éteint.
(Si malgré cela, la durée de fonctionnement n’est pas
encore devenue suffisamment longue pour un usage
pratique, c'est que la durée de vie de ce bloc-batterie est

terminée. Le remplacer par un bloc-batterie neuf.)

■ Utilisation du repère de confirmation de

charge

Ce repère permet de déterminer si le bloc-batterie est
chargé ou non.

Par exemple: pour signaler que le bloc-batterie est

complètement chargé, faire glisser le bouton de façon à
faire apparaître le point O-

ENGLISH

Charging Time and Maximum Time for
Continuous Shooting in the Manual
Shooting Mode

Battery Pack

No.

Charging

Time

Max. Continuous

Shooting Time

NV-
RX1EG

NV-
RX2EG

NV-
RX5EG

Supplied

60 min.

50 min. 50 min. 40 min.

VW-VBS10E

65 min.

55 min, 55 min. 45 min.

VW-VBS20E

130 min.

110 min.110 min. 90 min.

VW-VBH10E

80 min.

65 min. 65 min. 55 min.

VW-VBH20E

160 min.

130 min.130 min.110 min.

(The times shown in the above chart are approximations.)

Notes:

• Depending on the condition of the Battery Pack, the

charging time may be longer than listed above.

•The use of the zoom and other functions increases the

power consumption, so that the actual shooting time per
Battery Pack may actually be 30%-50% less than the
max. continuous shooting time listed above.

•When turning on the Movie Camera after attaching the

Battery Pack, the Remaining Battery Power Indication
initially Indicates a fully charged Battery Pack regardless

of its actual charging condition. Approx. 1 minute later,
the indication changes and shows the approximate
battery power actually remaining.

How to charge a Battery Pack if its operation time has
become too short for practical use, or if it has been
stored for a long time:

Continue charging for 24 hours even after the Charging

Indication Lamp on the AC Adaptor goes out.

(If this does not result in an operation time sufficient for
practical use, the service life of this Battery Pack has
reached its end. Replace it with a new one.)

■ Using the Charge Confirmation Marker

Use this marker to distinguish between charged and
discharged Battery Packs.
For example, slide the knob so that the dot Q is visible
after the charging is completed.

12

Advertising