Yamaha DEQ7 - Manual (Page 11)

MIDI BANK & CHANNEL ASSIGNMENT ]
The DEQ7 makes it possible to select specific programs via external
MIDI control. The DEQ7 receives a MIDI PROGRAM CHANGE
NUMBER and selects the program that you have assigned to it using
the MIDI PROG CHANGE function which will be described below'.
The DEQ7 actually can be programmed with foiu completely inde­
pendent sets of MIDI PROGRAM CHANGE NUMBER/MEMORY
NUMBER assignments. Each of these is contained in a different
“bank”: A, B, C or D. Before programming the assignments, how­
ever, it is necessary to set the DEQ7 MIDI transmit/receive chaimel
using the “MIDI CONTROL ch” function. An example of the way
the MIDI channel is set and the four banks may be programmed with
different program number/memory number assigmnents is given
below:
BANK: A BANK: B
PGM 1 = MEM 1 PGM 1 = MEM 6
PGM 2 = MEM 4 PGM 2 = MEM 7
PGM 3 = MEM 8 PGM 3 = MEM 16
PGM 128 = MEM 40 PGM128 = MEM 1
Voice PGM
number
Memory number of DEQ7
BANK: C BANK: D
PGM 1 = MEM 90 PGM 1 = MEM 1
PGM 2 = MEM 89 PGM 2 = MEM 2
PGM 3 = MEM 88 PGM 3 = MEM 3
PGM 128 = MEM 40 PGM128 = MEM 38
Q] MIDI Channel Selection
I
® Press the UTILITY key until the “MIDI CONTROL ch=” func­
tion appears.
(D Use the parameter editing
A
and V keys to set the MIDI
channel (1 — 16), the OMNI mode (all channels can be re­
ceived), or turn MIDI reception OFF.
Selected channel