Yamaha DEQ7 - Manual (Page 18)

3. Reception Conditions
4. Reception Data
4-1 Channel Information
O
NOTE ON
Only affects programs 25 and 28. When the control parameter
for these programs is set to NOTE #, the filter frequency is deter­
mined by the received NOTE NUMBER.
STATUS
NOTE NO.
VELOCITY
lOOInnnn (9nH)
Okkkkkkk
Ovvvvvvv
n = 0 (channel no. 1 )-
1 5 (channel no. 16)
k = 0 (C-2)-127(G s )
v = 0 ~ 1 2 7
e PROGRAM CHANGE
When received, the memory number is recalled that is assigned
to the received program change number in the program change
assignment table of the currently active bank.
STATUS I I O O n n n n ( C n H ) n = 0 (channel no. 1 )
1 5 (channel no. 16)
PROGRAM NO. Occccccc 0 = 0 - 1 2 7
0 CONTROL CHANGE
Control change messages can only be received when programs
25 or 28 are active. When the CONTROL parameter is set to
“MIDI Ft” reception is possible. Only the MIDI FOOT CON­
TROL CONTROL CHANGE message can be received.
STATUS 10 1 I n n n n (B n H)
CONTROL NO. 00000 I 00 (04H)
VALUE Ovvvvv-vv
n = 0 (channel no. 1 )
15 (channel no. 16)
Foot control
v = 0 - 1 2 7
16