Connecting the handset cable and telephone line, Connecting the power supply cord, Warning: this apparatus must be properly grounded – Panasonic Panafax UF-127M User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Handset Cable and Telephone Line
(1) Plug the Handset Cable into the Handset Socket and into the socket on the cradle.
(2) Plug the telephone line cord into the telephone jack supplied by the telephone company.
Connecting the Power Supply Cord
Plug the power supply cord into an ordinary AC outlet. Turn the power switch to the “ I ” position
to turn on the power. The power lamp on the control panel should light up.
Your machine uses little power and you should keep it ON at all times. If you turn the machine OFF
for too long, the contents of the memory (such as ID number, LOGO you registered) will be lost.
In case of a power failure the memory is backed up by a built-in battery for up to 7 days when it
is fully charged.
WARNING: This apparatus must be properly grounded.
NOT€
1. If you wish to use a telephone set other than the one supplied with the machine, connect it to the "TEL” jack on
the back of the machine with a telephone line cord.
2. The built-in rechargeable battery requires 48 hours to be fully charged.
3. The line connecting method, the type of telephone line cord and power supply cord vary depending on the country.