How to set your id number, I space iitiftirnitiryiryiiti – Panasonic Panafax UF-127M User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Set Your ID Number
When you transmit a document, your ID will appear on the other machine’s display. When you receive
a document, the sender’s ID will appear on your machine’s display. We suggest you use your facsi
mile telephone number as your ID, but you may use any number up to 20 digits long.
To set the ID number,
2
4*
dZI]
and
Enter the ID number using the keypad. You may
use
I
SPACE
I
to enter a space between the
numbers to make it easier to read.
Ex: rniSPACEli2imr2l
i SPACE iiTifTirniTiryiryiiTi
1 212 1 1 1 1 2 3 4
If you make a mistake, move the cursor to the incorrect number by pressing
( [ORIGINAL
I) or f> i ( I
RESOLUTION
I) , then reenter the correct number over
it. If you press i
STOP \
, you will have to start from Step 1 again.
If the ID number is over 15 digits long and you just entered a 16th digit, the display
clears and then shows only from the 17th digit on. To look at the first part of the
ID number, press [<"! fi
ORIGINAL
h repeatedly.
<t> START
To set the ID number.
1 5 - 1 0 - 1 9 9 1 1 5 : 0 0
NOT€
To enter " + press | PAUSE I. The display will show " H”, but do not worry, this is correct.
15