Panasonic Panafax UF-127M - Manual (Page 22)

ABBREVIATED/ONE-TOUCH DIALING NUMBERS
Entering Abbreviated/One-Touch Dialing Numbers
Abbreviated Dialing and One-Touch Dialing are two fast ways of dialing. To use these dialing methods,
you must first record the full numbers, using the following procedure. You can enter 70 abbreviated
numbers (01 to 70). Note that the numbers (01 to 16) are automatically assigned to the One-Touch keys.
To store an Abbreviated number;
2o
[- 1
and enter a two-digit code number on the keypad
(01 - 70).
Ex; [2][Ц
To store a One-Touch number;
[ 20 ]
2b
Press One-Touch key (01 - 16).
Ex: One-Touch key Ms |
[ 1 6 ]
Enter the facsimile telephone number (up to 36
digits, including pauses and spaces).
If you make a mistake, move the cursor to the incorrect number by pressing [<I|
( ! ORiGINAL i ) or ( I RESOLUTION I ), and then enter the correct number over it.
Ex: islIPAUSE ir^lTimrSPA^
If more than 12 digits are entered, the first
12 digits will scroll off the display.
2 0 1 9 - 2 1 2 1 1 1 2 3 4
20]
NOT€
[ 20 ]
1- if you require a special number to access an outside line, input the number first and then a pause by pressing
I PAUSE I before you enter the full number. A is displayed for a pause.
2. You can insert a space by pressing (SPACE | in the telephone number to make it easier to read. The space does
not effect the dialing.
3. When you press Щ and ¡^, "L” is displayed for and “J” for
4. If you have Pulse Dialing (Rotary) service and you need to change it to Tone Dialing in the middle of a long number,
press [ *~i to make the change. A ‘V’’ is displayed for the change.
19