Cleaning the head roller and scanning roller – Panasonic Panafax UF-127M User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Head Roller and Scanning Roller
The head roller in your machine will gradually accumulate dust in the course of regular use. You
should therefore clean the roller periodically using the following procedure.
1. Open the Receiving Unit by pressing down the latch
button on the right side panel and swinging the
Receiving Unit backward. Remove the recording
paper.
2. Wipe the Head Roller (black) gently with a soft,
clean cloth soaked with ethyl alcohol, while rotat
ing the roller slowly towards the back or front of the
machine with your fingers.
Receiving Unit
Head Roller
3, Wipe the Scanning Roller (white) with a soft clean
cloth with ethyl alcohol, while rotating the roller slow
ly towards the back or front of the machine with your
fingers.
4. Reset the recording paper correctly (see page 62),
then close the Receiving Unit by pressing down on
it gently. The recording paper projecting from the
unit will be cut automatically. Remove this cut
paper.
65