Setting the dialing method (tone or pulse), Setting the dialing method {tone or pulse) – Panasonic Panafax UF-127M User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either of two dialing methods (Tone or Pulse), depending on the type
of telephone line you are connected to. Your machine is preset at the factory for Pulse Dialing. If
your telephone line requires Tone Dialing, set to Tone Dialing using the following procedure.
1
tt SET
—
-.................
n
2
■X" TOME
Lj^J
—
3
Enter the Fax Parameter number.
EE
07
[1] 2
Blinking
To set Tone Dialing,
I—aJ
To return the dialing method to Pulse Dialing,
07
To store the new setting,
<p
START
07
To return to standby, press [STOP
[1] 1
'— Blinking
[
1] 2
Blinking
01 -01 - 1 9 0 0 1 2 : 0 0
NOTC
The number on the left of the display indicates the Fax Parameter number. The number inside the brackets is the
standard setting value and the number blinking on the right is the current setting.
12