Problem, Solving, Daily – Panasonic Panafax UF-127M User Manual
Page 66: Care
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
a
problem
solving
and
daily
care
Information Codes
Whisn something unusual occurs, the display may show one of the information codes beigw. These
will help you fix the problem.
Information
code
Meaning
Action
001/002/
003/004
Recording paper jam.
Remove jammed paper {see page 63).
010
No recording paper.
Reload recording paper (see page 62). |
020
Thermal Recording Head temperature is
too high.
Cpen the Receiving Unit for a few minuter
to permit cooling.
030
Document misfeeding.
1. Reload the document properly
(see page 28).
2. Remove document jam (see page 64),
3. Adjust ADF (see page 67),
031
Document paper is too long or jammed.
Document length exceeds 1 meter.
Remove jammed document from the ADF
(see page 64).
039
STOP key was pressed while sending/
copying documents and more than one
page remains on the ADF.
Remove the documents on the ADF (press
I STOP I when a document has already
entered the ADF). Reload the document
and try again.
060
Cover is opened.
Close the Receiving Unit.
400
During initial handshake, receiving station
did not respond or communication error
occurred.
1. Check with the other party.
2. Reload the document and try again.
402/404/405
During initial handshake, communication
failure occurred.
Reload the document and try again.
403
No polling capability at the other side.
Ask other side to set “PCLLED = ON”.
407
No confirmation from the receiving station
for the previous page sent.
Wait a few minutes and transmit again.
408/409
Other side confirmation of previous page is
illegible.
Wait a few minutes and transmit again.
411/414
Polling password does not match.
Check polling password.
412
No data from the transmitting side.
Check with the other party.
415
Polling function is incompatible.
Inform the other party that your machine
does not have the polling transmission
feature.
416/417/418/
419/490
Received data has too many errors.
Check with the other party.
420/421
Machine went into receiving mode, but no
command from the transmitting side.
1. Other side misdialed.
2. Check with the other party.
422
Interface is incompatible.
Check with the other party.
434/459/
493/494
Communication error occurred while
receiving.
Check with the other party.
451/495
Telephone line disconnected.
Check with the other party.
540/541/542/
534/544
Communication error occurred, while
transmitting.
1. Reload the document and try again.
2. Check with the other party.
630/633
Redial was not successful due to a busy
line or no response from the called station.
Reload the document and try again.
870
Memory overflow occurred while storing
documents into memory.
1. When substitute reception is used,
reload recording paper.
2. Transmit documents without storing into
memory.
61