Error correction mode (ecm) – Panasonic Panafax UF-127M User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Error Correction Mode (ECM)
ECM mode provides error free copy when your fax machine is connected with a receiving fax machine
which has ECM mode capability and your ECM mode is set to ON. The transmission time required
in the ECM mode is the same as the normal G3 mode in most cases.
Your machine is preset to ECM = ON. If the telephone line is poor, then the transmission will take
longer because the machine will have to retransmit the lines that have errors. In the case where
the transmission time is more important than the quality of the received copy, you may set your fax
machine to ECM = OFF. This will inhibit the ECM mode for the transmission regardless of the capa
bility of the receiving machine. To set ECM - OFF,
and
i— minL-T
Blinking
Enter the Fax Parameter number.
Q][I]
1 5
[
2
]
2
^—-Blinking
To set ECM = OFF.
1
c
1 5
[
2
]
1
"^Blinking
To return to ECM = ON,
2
CZI]
15
[
2
]
2
Blinking
4
<:> START
j .
To store the new setting, ; J
'— Blinking
© STOP
1 5 - 1 0 - 1 9 9 1 1 5 : 0 0
' ------
To return to standby,
n
32