How to load a document – Panasonic Panafax UF-127M User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Load a Document
First, make sure that your document is free of staples
and paper clips, and is not torn, greased, or covered
by any foreign objects.
Place the document face down on the Automatic
Document Feeder (ADF) with the top edge going into
the machine until it stops. Adjust the sliding document
guides to ensure that the document is centered on the
ADF.
If you are sending two or more pages, make sure that
the bottom sheet enters first. You can also stack
up to 10 sheets on the ADF at one time. If you want
to send more pages, you can place them on top of the
last page on the ADF once transmission has started,
as tong as you do not have more than 10 sheets on
the ADF at any one time.
When you set a document on the ADF, you can now
make basic transmission settings, or begin the dialing
procedure.
The ON LINE lamp will blink when you set the
document on the ADF correctly.
Face down
Document Guide
INCORRECT
28