Installing/replacmg recording paper, Installing/replacing recording paper – Panasonic Panafax UF-127M User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing/Replacmg Recording Paper
(T) Press the latch button down on the right side of the cover and open the Receiving Unit.
Remove the ADF Protective Sheet by pulling it up toward the rear of the machine.
Remove the Thermal Head Protective Sheet by pulling it toward the front of the machine.
ADF Protective Sheet
Thermal Head Protective Sheet
(2) Set the recording paper into the unit and feed the leading edge of the paper between the guide
plates of the cutter unit until it projects out of the unit. Make sure that the recording paper is
set correctly as shown in the figure below. If it is set incorrectly, the machine will not reproduce
images.
The top guide plate has marks indicating the width of the recording paper. When setting the recording paper, be sure
to align the paper with the marks (V).
NOT€
10