Panasonic Panafax UF-127M - Manual (Page 7)

Control Panel
DISPLAY
Shows Date and Time, Dialing Number or ID.
POWER Lamp
Lights when the power is ON.
ORIGINAL
Used to set Normal or Light. Also serves as
an arrow key ( < ), together with
RESOLUTION ( > ), to move the cursor over
recorded numbers and character codes.
STOP
Used to cancel operations. When it is pressed,
the machine will return to standby.
TEL/DIAL (SPACE)
Used for Direct Dialing and to enter a space
when recording telephone numbers.
COPY/LIST
Used to make document copies and print out
various lists.
RESOLUTION
Used to set Normal, Fine, or Super-Fine. Also
used as an arrow key ( > ), together with
ORIGINAL ( < ), to move the cursor over
recorded numbers and character codes.
START
Used to start or set operations.
* TONE
Used to indicate a change to DTMF (Tone
Dialing) when dialing.
Panasonic
^ ON LINE
o ALARM
o TELEPHONE
«P FAX
AUTO
ID DISPLAY
= POWER 11 NORMAL LIGHT |( STO PINE S-PINE |t HALF TONE (i = MEMORY f = fAXjTELEPNONE
ORIQINAL RESOLUTION
< CURSOR >
01 02 ' 02
i
1 04 Of j at 1 OT
1
! 08 1
!
6» 10 11 12
I"
u 15
i- i
1 2 3
rz^T_ _ _ _ _ _ _ _ _ _ _ _ _
4 5 6
1 1 1
1
7 8 9
1 1 i 1
■X"
TONE
0
tt SET
L 1_ _ _ _ _ _ _ _ 1 _ _ 1
PAUEE/REDIAL abbr • ROLLING
SPACE
TEUDIAL
0> START
ON LINE Lamp
Lights when communication begins. Blinks
when you place a document in the ADF unit,
correctly.
ALARM Lamp
Lights when a document becomes jammed,
a communication error occurs or recording
paper runs out.
HALF TONE
Provides ON and OFF settings for halftone
documents.
MEMORY
Used for memory transmission, multistation
and multi-copy. The MEMORY lamp lights up
when it is pressed.
# SET
Used to set Character Codes.
PAUSE/REDIAL
Used to start Redialing, or to enter a pause
when recording or dialing a telephone
number.
ABBR
Used to start Abbreviated Dialing.
POLLING
Used to start polling.
The POLLING lamp lights up when it is
pressed.
FAX/TELEPHONE
Used to switch FAX Mode, TEL Mode, AUTO
Mode.
One-Touch Keys (<>1--16)
Used for One-Touch Dialing.