STIEBEL ELTRON SOL 25 PLUS - Manual (Page 39)

WWW.STIEBEL-ELTRON-USA.COM SOL 25 PLUS | 39
EN
g
L
IS
h
Step 20: Install one of the cross braces to
the riser support using two ¼” nuts, bolts
and washers. If the collectors are being
mounted on a wall it is usually preferable
to install the cross braces between the two
base supports.
Step 21: Align the remaining cross brace to
the oppisite attachment slots and fasten it to
the riser support using the same fasteners
and attattach the two cross braces together
in the middle using one ¼” nut, bolts and
washer. The assembly is now ready to be
installed at the installation site.