STIEBEL ELTRON SOL 25 PLUS - Manual (Page 51)

WWW.STIEBEL-ELTRON-USA.COM SOL 25 PLUS | 51
EN
g
L
IS
h
Step 09: Align an S103U and an S103L.
Displayed is the proper alignment (rear
view).
Step 10: Proper alignment (side view).
Step 11: Prepare to assemble S103U and
S103L with displayed fasteners.
Step 12: Slide the 2 components together
as shown.
Step 13: Slide 2 of the ¼” bolts though the
slots of one component and the holes of the
other.
Step 14: Install two ¼” nuts and washers.
Repeat this procedure for the remaining two
riser struts.