STIEBEL ELTRON SOL 25 PLUS - Manual (Page 44)

44 | SOL 25 PLUS WWW.STIEBEL-ELTRON-USA.COM
Step 11: Install M10 nut. Repeat the
preceding 4 steps for the bottom left corner
of the rectangle.
Step 12: The resulting assembly. Turn this
assembly over so that the support rails are
on the ground and the and the profile rails
are slightly elevated before proceeding to
the next step.
Step 13: Prepare to install the lower right
hand ‘L’ bracket. The vertical portion should
contain the hole which is closest to the edge
of the bracket.