STIEBEL ELTRON SOL 25 PLUS - Manual (Page 6)

6 | SOL 25 PLUS WWW.STIEBEL-ELTRON-USA.COM
4.1 Accessories
Table 4.1.1 shows the mounting accessories available for several common arrangements of SOL 25 PLUS collectors.
Item Parts Included Part No.
R1 frame for one SOL 25 plus collector, vertical installation. In combination with the mounting
hardware sets, permits installation on pantile roofs, corrugated sheet roofs, flat roofs or walls. (2) profile rails
(8) anchor brackets
(8) sets M10-20 nuts and bolts
185545
R2 frame for one collector, horizontal installation, or two collectors, vertical installation. In
combination with the mounting hardware sets, permits installation on sloped roofs, flat roofs or
walls.
(2) profile rails
(16) anchor brackets
(16) sets M10-20 nuts and bolts
(1) compensator (flexible stainless steel tube
#170804) with vent screw and 2 seals
185546
Frame Connector kit for SOL 25 Plus. Connects two collector frames together. (2) S113 frame connectors
(8) sets M10-20 bolts and nuts
SFC001
Flush mounting kit for vertical installation on a roof or a wall for SOL 25 Plus Collector.
(2) S101 collector rails (vertical)
(4) S102 L-brackets
(8) sets M10-20 nuts and bolts
SFM001
Flush mounting kit for horizontal installation on a roof or a wall for SOL 25 Plus Collector.
(2) S201 collector rails (horizontal)
(4) S102 L-brackets
(8) sets M10-20 nuts and bolts
SFM001H
Frame tilt mounting kit for vertical installation of SOL 25 Plus (TWO NEEDED PER FRAME).
(1) adjustable riser strut set (S103U, S103L)
(4) S102 L-brackets
(1) S109 cross-brace
(1) S101 collector rail (vertical)
(5) sets M10-30 nuts and bolts
(5) sets 1/4“-20 x 3/4“ bolts, nuts, and washers
SFT004
Frame tilt mounting kit for horizontal installation of SOL 25 Plus (TWO NEEDED PER FRAME).
(1) adjustable riser strut set (S103HU, S103HL)
(4) S102 L-brackets
(1) S109 cross-brace
(1) S201 collector rail (horizontal)
(5) sets M10-30 nuts and bolts
(5) sets 1/4“-20 x 3/4“ bolts, nuts, and washers
SFT004H
45° mounting frame for vertical installation of SOL 25 Plus (TWO NEEDED PER FRAME)
(1) SE45-110R support riser
(1) SE45-110B support base
(1) SE45-111 collector rail (vertical)
(1) S109 cross-brace
(2) sets M10-20 nuts and bolts
(3) sets 1/4“-20 x 3/4“ bolts, nuts, and washers
(3) sets 3/8“-16 x 3“ flange bolts and nuts
185543
45° mounting frame for horizontal installation of SOL 25 Plus (TWO NEEDED PER FRAME)
(1) S4528R support riser
(1) S4518B support base
(1) S107H collector rail (horizontal)
(1) S109 cross-brace
(2) sets M10-20 nuts and bolts
(3) sets 1/4“-20 x 3/4“ bolts, nuts, and washers
(3) sets 1/4“-20 x 2-1/2“ bolts, nuts, and washers
074324
60° mounting frame for vertical installation of SOL 25 Plus (TWO NEEDED PER FRAME)
(1) SE60-110 support riser
(1) SE60-108 support base
(1) S101 collector rail (vertical)
(1) S109 cross-brace
(2) sets M10-20 nuts and bolts
(3) sets 1/4“-20 x 3/4“ bolts, nuts, and washers
(3) sets 3/8“-16 x 3“ flange bolts and nuts
SE60
Aluminum Clamp for metal roof (1) clamp
(2) 3/8“ bullet nosed setscrews
(1) M10 bolt with washer
S5U
4. INSTALLATION INSTRUCTIONS FOR ThE PROFESSIONAL
* NOTE: All fasteners in these kits are of stainless steel.