STIEBEL ELTRON SOL 25 PLUS User Manual
Page 54
Advertising
54
| SOL 25 PLUS
WWW.STIEBEL-ELTRON-USA.COM
Step 21: Install an M10 serrated flange nut.
Repeat this procedure for the other side.
Step 22: Align the bottom front ‘L’ brackets
as shown.
Step 23: Prepare to install the front left ‘L’
bracket. Note that the side of the ‘L’ bracket
with the hole closer to the edge is aligned
parallel to the support rails.
Advertising