FRITSCH PULVERISETTE 7 premium line - Manual (Page 44)

5.9.4 Inserting the grinding bowl in the grinding bowl holder
Carry out the following checks before inserting the grinding bowls:
1.
Are the grinding bowls clean on the outside? à remove any
coarse dirt.
2. Is the grinding bowl adapter clean on the inside? à remove any
coarse dirt.
3. Are the grinding bowls sealed correctly (see Ä Chapter 5 ‘Using
the device’ on page 27).
Inserting the grinding bowls
1.
Open the clamping bracket (10).
2. Hold the grinding bowl at the handle (5) and set it in the grinding
bowl adapter.
3. Turn the grinding bowl until it can be felt to engage and drops a
few millimetres into the grinding bowl adapter.
10 Clamping bracket
11 Locking element
12 Bracket guide
Using the device
- 44 -