FRITSCH PULVERISETTE 7 premium line - Manual (Page 72)

6.3.2 Inserting / changing the battery
Prior to initial start-up, the battery (2) provided must be inserted in the
measuring/transmission unit (8) of the system.
When inserting it for the first time and during subsequent replacement
of the battery, proceed as follows:
1.
If not already done, switch off the radio system using the button
(A). The LED (B) goes out.
2. Then release the six socket head screws (C) for closing the system
using a hexagon screwdriver (7). The locking ring (11) with 6
socket head screws can be removed now. (see Ä Chapter 6.3.11
‘Cleaning the EASY GTM system’ on page 83)
3. Carefully lift the measuring/transmission unit (8) off the bowl (10).
4. If the lid (9) is on the unit, release it by hand and place it to the
side. The lid normally remains on the bowl (10).
Accessories
- 72 -