FRITSCH PULVERISETTE 7 premium line - Manual (Page 81)

6.3.8 Entering the pressure limit
1. Select the maximum pressure input.
If the max. pressure is reached, the device stops the
grinding process and goes into cooling mode!
Depending on the setting of the operating mode, see
Ä Chapter 6.3.9 ‘Selecting the operating mode’
on page 82, the device stops the grinding process and
opens the grinding chamber cover or reduces the
speed gradually until a minimum speed is reached in
order to achieve an optimal reduction of pressure.
2. Enter the required max. pressure limit.
DANGER!
Do not exceed a maximum pressure of 14 bar. Otherwise,
the EASY GTM system and the machine will be damaged.
3. Mit [<] Taste die Eingabe bestätigen und zum Untermenü EASY
GTM zurückkehren.
4. Select the minimum pressure input.
5. Enter the required min. pressure limit.
When the selected min. pressure (e.g. 2 bar) is
reached again during the cooling phase, the mill
starts the grinding process again.
6. Press the [<] button to confirm your entry and return to the EASY
GTM sub-menu.
Accessories
- 81 -