FRITSCH PULVERISETTE 7 premium line - Manual (Page 83)

3. Deactivate EASY GTM.
4. Press the[<] button to confirm your entry and return to the main
menu.
6.3.11 Cleaning the EASY GTM system
NOTICE!
The threaded holes inside the bowl, the passage holes and
the Allen screws in the locking ring have to be cleaned thor-
oughly after each grinding to allow a safe fastening of the
EASY GTM system.
NOTICE!
The measuring/transmission unit (8) may not be immersed
in water. It can be rubbed down with a damp cloth if neces-
sary.
Remove the locking ring including the screws of the measuring/transmis-
sion unit and clean it completly.
The screws are provided with a snap ring, which prevents them to fall
out of the locking ring. Pay attention to the position of the snap rings!
(see picture!)
Accessories
- 83 -