FRITSCH PULVERISETTE 7 premium line - Manual (Page 57)

To tolerate this imbalance within specific limits, you can set the shut-
down threshold.
Touch the adjustment bar or move it back and forth by applying slight
pressure.
Press the "<" button to confirm your entries
Small setting values make the measuring system more sen‐
sitive, and high values make it less sensitive.
5.12.9 Switching off
NOTICE!
If the permissible maximum temperature in the bowl is
exceeded during grinding, then the device must not be
switched off with the lid closed. That could lead to heat
accumulation in the machine, which could cause damage to
the device.
Provide sufficient cooling by letting the mill continue to run
at a speed of 100 rpm for approx. 20 - 30 min. or by shut-
ting off the mill with the lid open.
1. Press "STOP" on the display.
2. When the drive comes to a stop, grinding station 1 is moved into
the loading position and the grinding chamber cover opens auto-
matically.
Using the device
- 57 -