FRITSCH PULVERISETTE 7 premium line - Manual (Page 53)

5.12.3 Overload
If the planetary micro mill is overloaded, the speed is reduced. The
reduced speed flashes on the display.
5.12.4 "Program" menu item
Grinding cycles can be programmed, saved and selected here.
1. Press the "Menu" button in the main menu.
2. Then press the "Program" button ￫ A new window appears.
3. The "Current" column shows the current parameters of previous
entries.
4. The "Program" column shows the data previously stored under
button 1.
Using the device
- 53 -