Kistler-Morse KM ultrawave - Manual (Page 78)

Cx=(
‘C’ ‘+’ ‘*’ "
9. Press the F1 Key to select C. Press 1 on the keypad. Press the F2 Key to select +. The display shows:
Cx=(C1+
‘C’ ‘+’ ‘*’ "
10. Press the F1 Key to select C. Press 2 on the keypad. Press the F2 Key to select +. The display shows:
Cx = (C1+C2+
‘C’ ‘+’ ‘*’ "
11. Press the F1 Key to select C. Press 3 on the keypad. Press the F2 Key to select +. The display shows:
Cx=(C1+C2+C3+
‘C’ ‘+’ ‘*’ "
12. Press the F1 Key to select C. Press 4 on the keypad. The display shows:
Cx=(C1+C2+C3+C4
‘C’ ‘+’ ‘*’ "
13. Press the Menu Key two times to access the third page of the Math Menu. The display shows:
Cx=(C1+C2+C3+C4
‘(’ ‘)’ ‘*’ CLR"
14. Press the F2 Key to select ). The display shows:
x=(C1+C2+C3+C4)
‘(’ ‘)’ ‘*’ CLR"
Notice that the display has started to scroll — the C on the far left is not visible because of space
limitations.
15. Press the Menu Key three times to access the second page of the Math Menu. The display shows:
x=(C1+C2+C3+C4)
‘-’ ‘÷’ ‘=’ "
16. Press the F2 Key to select ÷. Press 4.0 on the keypad. The display shows:
1+C2+C3+C4)ч4.0
‘-’ ‘ч’ ‘=’ "
17. After reviewing equation, press Enter to save equation to memory. A message should scroll across the
screen acknowledging the entry. After entering the equation, the display should return to:
0x
RSLT* xx
74
97-1163-01 Rev. D
www.kistlermorse.com