Cisco 11500 Series - Manual (Page 107)

3-15
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Chapter 3 Booting and Configuring the CSS
Using the Configuration Script
The script prompts you to configure:
• Service name (default name is Server1)
• VIP for the content rule
To configure Layer 5 load balancing, enter 2.
Which feature do you want to configure?
[1] Layer3 load balancing
[2] Layer5 load balancing
[3] Proxy cache
[4] Transparent cache
Enter the number for the feature you want to configure: 2
To accept the script default values, press the Enter key at the prompts.
Creating Layer5 load balancing
Enter service name: [default= Server1]
Enter service IP address: [default = 192.168.10.3] 192.168.3.58
Create another service? [y/n]? n
Enter Virtual IP address for L5_Rule: [default = 192.168.10.4]
192.168.3.8
After the configuration is completed, the script automatically:
• Displays the running-config
• Saves the running-config to the startup-config
Showing the Running Config
!Generated MAR 6 17:53:49
!**************** GLOBAL *****************
ip route 0.0.0.0 0.0.0.0 192.168.3.3
!**************** CIRCUIT ****************
circuit VLAN1
ip address 192.168.3.6 255.255.255.0
!**************** SERVICE ****************
service Server1
ip address 192.168.3.58
active