Installing a css 11501 as a rackmounted unit, Figure 1-1 – Cisco 11500 Series User Manual

Page 41

Advertising
background image

1-13

Cisco 11500 Series Content Services Switch Hardware Installation Guide

78-13884-03

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11501

Installing a CSS 11501 as a Rackmounted Unit

Before you begin, you need the mounting brackets and the 12 Phillips screws
shipped in the accessory kit accompanying the CSS 11501, and a #2 Phillips
screwdriver.

To install the mounting brackets on the CSS 11501 chassis:

1.

Position the CSS with its front panel facing you. On the left and right sides
of its chassis, note the screw holes for installing the mounting brackets.

2.

Position a mounting bracket on one side of the chassis. Align it with the
appropriate screw holes for front- or mid-mounting.

Figure 1-2

illustrates front-mounting the mounting brackets.

Figure 1-1

Front-Mounting the Mounting Brackets on the CSS 11501

3.

Secure the mounting bracket to the CSS with six screws provided.

4.

Repeat steps 2 and 3 to install a mounting bracket on the other side of the
CSS.

You are ready to install the CSS in the rack.To install the CSS 11501 into an
equipment rack:

1.

Raise the CSS to the installation height and align the screw holes on the
mounting bracket with the holes on the equipment rack.

2.

Secure each mounting bracket to each side of the rack.

CISCO 11500

SERIES

C ONTENT

S ERVICES S

W ITCH

78675

DUPLEX

LINK/ACT

LINK

STATUS

PCMCIA

GE

CONSOLE

LINK DPLX

LINK DPLX

LINK DPLX

LINK DPLX

1

2

3

4

10/100

LINK DPLX

LINK DPLX

LINK DPLX

LINK DPLX

5

6

7

8

10/100

Advertising