Cisco 11500 Series - Manual (Page 141)

C-11
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Appendix C Troubleshooting
Troubleshooting the CSS Power Supply
Troubleshooting the CSS Power Supply
The following sections discuss:
• Troubleshooting the CSS 11501 Power Supply
• Troubleshooting the CSS 11503 Power Supply
• Troubleshooting the CSS 11506 Power Supply
Troubleshooting the CSS 11501 Power Supply
The CSS 11501 has one power supply as part of its chassis. When you power on
the CSS, the indications of a successful power up are that it boots properly and
become operational, and displays the following log message:
CHMGR: All power supplies are present (1).
Note This message is displayed only if the logging level is set to the Info-6 or Debug-7
level.
If you power on the CSS and it does not boot as indicated by the Status LEDs,
either:
• There is no power to the power supply. Ensure that the CSS 11501 has power.
Check the power switch, power cord, and power source.
• The power supply failed, obtain technical assistance.