Cisco 11500 Series - Manual (Page 68)

Chapter 2 Cabling the CSS
Cabling the CSS 11503 and CSS 11506 Modules
2-12
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Figure 2-4 illustrates the SCM front panel connectors, PCMCIA slots, and LEDs.
Figure 2-4 Switch Control Module Connectors and LEDs
1 10-Mbps half-duplex Ethernet management
connector 8 RJ-45 RS-232 Console connector
2 Bicolor status LED (green and red) 9 RJ-45 RS-232 Diag connector for field
service diagnostic use only. (A connector
cover is provided. Removing the cover voids
the warranty.)
3 Amber status LED 10 PCMCIA slot cover
4 Link/Act LED 11a PCMCIA slot 0 containing a flash or hard
disk
5 Duplex LED 11b PCMCIA slot 1 (shown empty) for optional
installation of a second flash or hard disk
6 LC-type SFP GBIC (one of two) 12 Recessed button (reserved for field service
use only)
7 Link LED for the associated SFP GBIC on
the left
78993
C SS
5-S
C M -2G
E
System
C
on
tr ol
DUPLEX LINK/ACT
MANAGEMENT
10BASE-T
SLOT 0
SLOT 1
GE 1
GE 2 LINK
LINK
STATUS
PCMCIA
CONSOLE
2
1 9
8
3
4
5
6
11b
7
10 11a 12