Cisco 11500 Series - Manual (Page 48)

Chapter 1 Unpacking and Installing the CSS
Installing a CSS Module
1-20
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Installation Precautions and Restrictions
This section includes background material related to installing a module into the
CSS chassis. Cisco Systems recommends that you read the topics in this section
before installing a module.
Installation Precautions
Caution You must power down the CSS before installing or removing a module in a
CSS 11506.
Read and observe the following precautionary information prior to servicing the
CSS.
Warning Do not remove or install modules without using appropriate anti-static guard
measures. The CSS includes an anti-static wrist strap in the accessory kit.
Attach the copper tape end of the strap to an unpainted metal surface on the
chassis. You can leave the strap connected to the chassis when you are done.
Warning If you do not power down the CSS, an electrical energy hazard is present within
the chassis. Prior to installing or removing components, remove all metallic
objects from hands and wrists to prevent bridging of live contact points.