Recording in lp (long play recording) mode, Notes on the use of lp mode, To return to sp mode – Sharp VIEWCAM VL-NZ50U User Manual
Page 45: Tape spe
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording in LP (Long
Play Recording) Mode
This camcorder allows you to record in LP
(Long Play Recording) mode for approximately
50% more recording time with the same picture
quality as that in SP (Standard Play Recording)
In CAMERA mode, press the MENU
button until the menu screen appears.
on the operation button
to select , then press the SET button.
or A to select “TAPE SPEED”,
then press the SET button.
to select “LP”, then press
the SET button.
Press the MENU button to turn off the
• The iong play recording mode indicator
only appears when the on-screen
indicators are turned on.
A U T O
Notes on the use of LP mode
• To record in LP mode, be sure to use a Mini
DV cassette labeled for use with LP mode,
• Frozen images, mosaic-pattern picture noise,
audio interruptions or audio loss may occur in
the following cases:
—When using a tape which is not designated
for use with LP mode.
—When a tape recorded in LP mode under
high temperature conditions is piayed
—When a tape recorded in LP mode with the
camcorder is piayed back on a Mini DV
player or camcorder from another manu
—When a tape recorded in LP mode is
played back on a Mini DV player or
camcorder without an LP function.
• Audio dubbing is not possible with LP mode
Long play recording
To return to SP mode
Select “SP” in step 4 above.