Using the remote control (not supplied), Installing the batteries, Activating – Sharp VIEWCAM VL-NZ50U User Manual

Page 47: Remote, Operating, Remote ion

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Using the Remote

Control (Not supplied)

The remote control (RRMCG0084TASA) is not

supplied with this camcorder. Contact the
nearest SHARP service center or your dealer

for purchasing as a specified part.

Installing the Batteries

1

Open the battery compartment cover.

2

Insert the two commercially available AA

(R6 or UM/SUM-3) batteries with the

battery poles positioned as indicated.

3

Place the cover.

Activating

1

In VCR mode, press the MENU button
until the menu screen appears.

2

Press 7 or A on the operation button

to select ETC, then press the SET button.

3

Press "7 or A to select “REMOTE”,

then press the SET button.

4

Press V or A to select “ON”, then press
the SET button.

REMOTE

ION

5

Press the MENU button to turn off the
menu screen.

Operating

Aim the remote control at the remote sensor of
the camcorder, and press the control buttons to
operate.

REW button

REC START/STOP button

ZOOM buttons (W/T)

FF button

SLOW button

PLAY button

'STOP button

VOLUME -/+ buttons

PAUSE/STILL button

Notes:

• Do not use old and new batteries together or

batteries of different brands together.

• Be careful not to expose the remote sensor to

direct sunlight or strong interior lighting, as this

may prevent the remote control from operating

properly.

• Be sure that there are no obstacles between the

remote control and the remote sensor.

34

Advertising