FingerTec H2i Manual - Manual (Page 5)

5 CONTENTS
LED
Card
Induction
Area
USB Port &
Reset button
H2i
s u p p o r t @ f i n g e r t e c . c o m
Reset
Fingerprint
Scanner
Speaker
Front of Terminal Bottom of Terminal
2 • BASICS
Introduction to H2i
FingerTec H2i is a simple master terminal, functioning as a time attendance and
door access device and it can be used as a time attendance recorder as well. The H2i
has a simple and sleek design as it comes without a keypad or any form of a display
screen. It communicates with its users mainly through its voice commands, as well
as its dual color LED light. To perform administrative functions on the terminal, an
administrator card is needed. However, the H2i also has the option of using a nu-
meric USB keypad as an administrative tool. As usual, more advanced management
of FingerTec H2i can be done via the included software in the package.
H2i Overview
Item Function
LED Indicating status of terminal and result of verification
Green – Terminal is in standby mode, or verify users successfully.
Red – Terminal has failed to verify user.
Fingerprint sensor To scan finger for confirmation of identity.
Card induction area Area that reads cards.
Speaker For terminal voice emission.
Reset button To restart the terminal as and when required.
USB port To connect a USB extension for data download into a USB flash
disk (pen drive). To connect a USB Keypad to input numerical
commands into the terminal (optional).